Hello, 
I have a SUN , BLADE-150 (Solaris-8). 
I'm requested to build an application which reads 
data from a USB Barcode Reader Device. 
I' ve updated the latest patches from SUN (for multiple kyboards support).
I should address the Barcode-Reader device as an additional keyboard.


I now have a directory called : dev/usb/5e0.28a/0 
And it contains the files :cntrl0@, cntrl0stat@, devstat@ ,if0in1@ , if0in1s
tat@ 

I' ve installed DDK.0.9 from http://wwws.sun.com/software/downlo...
b9.html 
And run a small sample program file , which came with the DDK.0.9 kit. 

The program is using ugen(7D) to read a device descriptor: 

>devdescr /dev/usb/5e0.28a/0 

The output was: 

Device descriptor: VID:05e0, PID:028a 
Device release:0x204, USB release:0x110 
Descriptor Length:18, Type:1 
Device Class:0, Subclass:0, Protocol:0, Num Cfgs:1 


My question is : How can I read the actual data (The scanned barcode) from t
he USB device ? 
(How can I read data from a "Raw Device Interface" ?)

Thank's.

[ Post a follow-up to this message ]