Hi!

I'm having problems installing AppCenter on a Virtual PC (Windows 2000 Adv.
Svr) build.
I'm using the SP2 build of AppCenter and it gets about 3/4 thru the setup
before failing with a 1722 error - the setup then rolls back.

Has anyone encountered this, or help out in anyway - I've installed from the
very same distribution on to VMWare no problems.

thanks
s.

[ Post a follow-up to this message ]

Can you post your ac_setup.log from the winnt folder?  It should get
generated if you run setup.hta and let it rollback.

Thank You

George Cheng

Microsoft Application Center & Index Server Support

Note: This article has no warranties implicit or explicit.
All the content is given on the "as is" basis and the user
takes full responsibility for its use and assumption.
Microsoft Corporation Copyright 2004
All Rights Reserved

--------------------
From: "Spencer Harbar [MVP]" <spence@harbar.net>
Subject: Install on Virtual PC
Date: Tue, 20 Jul 2004 15:21:28 +0100
Lines: 14
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2149
X-RFC2646: Format=Flowed; Original
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2149
Message-ID: <uI5uaTmbEHA.1152@TK2MSFTNGP09.phx.gbl>
Newsgroups: microsoft.public.applicationcenter.setup
NNTP-Posting-Host: 212.20.246.38
Path:
cpmsftngxa06.phx.gbl!TK2MSFTNGXS01.phx.gbl!TK2MSFTNGXA05.phx.gbl!TK2MSFTNGP0
8.phx.gbl!TK2MSFTNGP09.phx.gbl
Xref: cpmsftngxa06.phx.gbl microsoft.public.applicationcenter.setup:4592
X-Tomcat-NG: microsoft.public.applicationcenter.setup

Hi!

I'm having problems installing AppCenter on a Virtual PC (Windows 2000 Adv.
Svr) build.
I'm using the SP2 build of AppCenter and it gets about 3/4 thru the setup
before failing with a 1722 error - the setup then rolls back.

Has anyone encountered this, or help out in anyway - I've installed from
the
very same distribution on to VMWare no problems.

thanks
s.

[ Post a follow-up to this message ]

I can't post it here (even as a zip) there appears to be a limit on message
size - the ZIP is 140K.

s.



""George Cheng [MSFT]"" <GCheng@online.microsoft.com> wrote in message
news:RSMcZ8obEHA.3416@cpmsftngxa06.phx.gbl...
> Can you post your ac_setup.log from the winnt folder?  It should get
> generated if you run setup.hta and let it rollback.
>
> Thank You
>
> George Cheng
>
> Microsoft Application Center & Index Server Support
>
> Note: This article has no warranties implicit or explicit.
> All the content is given on the "as is" basis and the user
> takes full responsibility for its use and assumption.
> Microsoft Corporation Copyright 2004
> All Rights Reserved
>
> --------------------
> From: "Spencer Harbar [MVP]" <spence@harbar.net>
> Subject: Install on Virtual PC
> Date: Tue, 20 Jul 2004 15:21:28 +0100
> Lines: 14
> X-Priority: 3
> X-MSMail-Priority: Normal
> X-Newsreader: Microsoft Outlook Express 6.00.2900.2149
> X-RFC2646: Format=Flowed; Original
> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2149
> Message-ID: <uI5uaTmbEHA.1152@TK2MSFTNGP09.phx.gbl>
> Newsgroups: microsoft.public.applicationcenter.setup
> NNTP-Posting-Host: 212.20.246.38
> Path:
> cpmsftngxa06.phx.gbl!TK2MSFTNGXS01.phx.gbl!TK2MSFTNGXA05.phx.gbl!TK2MSFTNG
P0
> 8.phx.gbl!TK2MSFTNGP09.phx.gbl
> Xref: cpmsftngxa06.phx.gbl microsoft.public.applicationcenter.setup:4592
> X-Tomcat-NG: microsoft.public.applicationcenter.setup
>
> Hi!
>
> I'm having problems installing AppCenter on a Virtual PC (Windows 2000
> Adv.
> Svr) build.
> I'm using the SP2 build of AppCenter and it gets about 3/4 thru the setup
> before failing with a 1722 error - the setup then rolls back.
>
> Has anyone encountered this, or help out in anyway - I've installed from
> the
> very same distribution on to VMWare no problems.
>
> thanks
> s.
>
>
>

[ Post a follow-up to this message ]

"Spencer Harbar [MVP]" wrote:

> Hi!
>
> I'm having problems installing AppCenter on a Virtual PC (Windows 2000 Adv
.
> Svr) build.
> I'm using the SP2 build of AppCenter and it gets about 3/4 thru the setup
> before failing with a 1722 error - the setup then rolls back.
>
> Has anyone encountered this, or help out in anyway - I've installed from t
he
> very same distribution on to VMWare no problems.
>
> thanks
> s.
>
>
>

[ Post a follow-up to this message ]

In the ac_setup.log, start from the top and search for the first instance
of "return value 3".  Copy that line and the 10 lines above it and post
your reply here.

Thank You

George Cheng

Microsoft Application Center & Index Server Support

Note: This article has no warranties implicit or explicit.
All the content is given on the "as is" basis and the user
takes full responsibility for its use and assumption.
Microsoft Corporation Copyright 2004
All Rights Reserved

--------------------
Thread-Topic: Install on Virtual PC
thread-index: AcSUNDXX8VoJ5iRoRNSOU830wEW+9w==
X-WBNR-Posting-Host: 151.201.244.150
From: examnotes <Joe G.@discussions.microsoft.com>
References:  <uI5uaTmbEHA.1152@TK2MSFTNGP09.phx.gbl>
Subject: RE: Install on Virtual PC
Date: Mon, 6 Sep 2004 10:09:03 -0700
Lines: 19
Message-ID: <CF47F259-7108-4424-A36F-CE7B51F33105@microsoft.com>
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.applicationcenter.setup
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.applicationcenter.setup:4641
X-Tomcat-NG: microsoft.public.applicationcenter.setup



"Spencer Harbar [MVP]" wrote:

> Hi!
>
> I'm having problems installing AppCenter on a Virtual PC (Windows 2000
Adv.
> Svr) build.
> I'm using the SP2 build of AppCenter and it gets about 3/4 thru the setup
> before failing with a 1722 error - the setup then rolls back.
>
> Has anyone encountered this, or help out in anyway - I've installed from
the
> very same distribution on to VMWare no problems.
>
> thanks
> s.
>
>
>

[ Post a follow-up to this message ]

Here are my 10 lines.  Same situation and error 1722.

Action 17:15:21: LockDownSQLRegistryPermissions. 
MSI (s) (0C:B0) [17:15:21:019]: Executing op: CustomActionSchedule(Action=Lo
 ckDownSQLRegistryPermissions,ActionType=
1025,Source=BinaryData,Target=LockDo
wnSQLRegistryPermissions,)
MSI (s) (0C:38) [17:15:21:059]: Invoking remote custom action. DLL: C:\WINNT
\Installer\MSI1E8.tmp, Entrypoint: LockDownSQLRegistryPermissions
MSI (s) (0C:B0) [17:15:21:110]: Executing op: ActionStart(Name=rollback_regi
ster_plogcons.dll,,)
Action 17:15:21: rollback_register_plogcons.dll. 
MSI (s) (0C:B0) [17:15:21:120]: Executing op: CustomActionSchedule(Action=ro
llback_register_plogcons.dll,ActionType=1362,Source=C:\Program Files\Microso
ft Application Center\plsetup.exe,Target=-uninstall,)
MSI (s) (0C:B0) [17:15:21:120]: Executing op: ActionStart(Name=register_plog
cons.dll,,)
Action 17:15:21: register_plogcons.dll. 
MSI (s) (0C:B0) [17:15:21:120]: Executing op: CustomActionSchedule(Action=re
gister_plogcons.dll,ActionType=1042,Source=C:\Program Files\Microsoft Applic
ation Center\plsetup.exe,Target=-install,)
MSI (s) (0C:B0) [17:15:21:400]: Note: 1: 1722 2: register_plogcons.dll 3: C:
\Program Files\Microsoft Application Center\plsetup.exe 4: -install 
DEBUG: Error 2835:  The control ErrorIcon was not found on dialog SetupError
Internal Error 2835. ErrorIcon, SetupError The program experienced an intern
al error. If this condition persists, restart the application or contact you
r support personnel.
Error  1722. An error occurred while performing the task.There is a problem 
with this Windows Installer package. A program run as part of the setup did 
not finish as expected. Contact your support personnel or package vendor.  A
ction register_plogcons.dll, location: C:\Program Files\Microsoft Applicatio
n Center\plsetup.exe, command: -install 
MSI (s) (0C:B0) [17:15:59:357]: Product: Microsoft Application Center 2000 S
P2 -- Error  1722. An error occurred while performing the task.There is a pr
oblem with this Windows Installer package. A program run as part of the setu
p did not finish as expected. Contact your support personnel or package vend
or.  Action register_plogcons.dll, location: C:\Program Files\Microsoft Appl
ication Center\plsetup.exe, command: -install 

Action ended 17:15:59: InstallFinalize. Return value 3.

quote:
Originally posted by George Cheng [MSFT] 
In the ac_setup.log, start from the top and search for the first instance
of "return value 3".  Copy that line and the 10 lines above it and post
your reply here.

Thank You

George Cheng

Microsoft Application Center & Index Server Support

Note: This article has no warranties implicit or explicit.
All the content is given on the "as is" basis and the user
takes full responsibility for its use and assumption.
Microsoft Corporation Copyright 2004
All Rights Reserved

--------------------
Thread-Topic: Install on Virtual PC
thread-index: AcSUNDXX8VoJ5iRoRNSOU830wEW+9w==
X-WBNR-Posting-Host: 151.201.244.150
From: examnotes <Joe G.@discussions.microsoft.com>
References:  <uI5uaTmbEHA.1152@TK2MSFTNGP09.phx.gbl>
Subject: RE: Install on Virtual PC
Date: Mon, 6 Sep 2004 10:09:03 -0700
Lines: 19
Message-ID: <CF47F259-7108-4424-A36F-CE7B51F33105@microsoft.com>
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.applicationcenter.setup
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.applicationcenter.setup:4641
X-Tomcat-NG: microsoft.public.applicationcenter.setup



"Spencer Harbar [MVP]" wrote:

> Hi!
>
> I'm having problems installing AppCenter on a Virtual PC (Windows 2000
Adv.
> Svr) build.
> I'm using the SP2 build of AppCenter and it gets about 3/4 thru the setup
> before failing with a 1722 error - the setup then rolls back.
>
> Has anyone encountered this, or help out in anyway - I've installed from
the
> very same distribution on to VMWare no problems.
>
> thanks
> s.
>
>
> 

[ Post a follow-up to this message ]

Try running setup with Application Center tracing enabled.  Run
traceoutput.reg on CD in SUPPORT directory and then run dbmon in a command
window before you start the install.   Post the output from dbmon if you
need more help.
--
Richard Ault
Application Center Product Team

This posting is provided "AS IS" with no warranties, and confers no rights.
Use of any included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

"sdmoore" <sdmoore.1xudp0@mail.webservertalk.com> wrote in message
news:sdmoore.1xudp0@mail.webservertalk.com...
>
> Here are my 10 lines.  Same situation and error 1722.
>
> Action 17:15:21: LockDownSQLRegistryPermissions.
> MSI (s) (0C:B0) [17:15:21:019]: Executing op:
>  CustomActionSchedule(Action=LockDownSQLR
egistryPermissions,ActionType=1025
 ,Source=BinaryData,Target=LockDownSQLReg
istryPermissions,)
> MSI (s) (0C:38) [17:15:21:059]: Invoking remote custom action. DLL:
> C:\WINNT\Installer\MSI1E8.tmp, Entrypoint:
> LockDownSQLRegistryPermissions
> MSI (s) (0C:B0) [17:15:21:110]: Executing op:
>  ActionStart(Name=rollback_register_plogc
ons.dll,,)
> Action 17:15:21: rollback_register_plogcons.dll.
> MSI (s) (0C:B0) [17:15:21:120]: Executing op:
>  CustomActionSchedule(Action=rollback_reg
ister_plogcons.dll,ActionType=1362
,Source=C:\Program
> Files\Microsoft Application Center\plsetup.exe,Target=-uninstall,)
> MSI (s) (0C:B0) [17:15:21:120]: Executing op:
> ActionStart(Name=register_plogcons.dll,,)
> Action 17:15:21: register_plogcons.dll.
> MSI (s) (0C:B0) [17:15:21:120]: Executing op:
>  CustomActionSchedule(Action=register_plo
gcons.dll,ActionType=1042,Source=C
:\Program
> Files\Microsoft Application Center\plsetup.exe,Target=-install,)
> MSI (s) (0C:B0) [17:15:21:400]: Note: 1: 1722 2: register_plogcons.dll
> 3: C:\Program Files\Microsoft Application Center\plsetup.exe 4:
> -install
> DEBUG: Error 2835:  The control ErrorIcon was not found on dialog
> SetupError
> Internal Error 2835. ErrorIcon, SetupError The program experienced an
> internal error. If this condition persists, restart the application or
> contact your support personnel.
> Error  1722. An error occurred while performing the task.There is a
> problem with this Windows Installer package. A program run as part of
> the setup did not finish as expected. Contact your support personnel or
> package vendor.  Action register_plogcons.dll, location: C:\Program
> Files\Microsoft Application Center\plsetup.exe, command: -install
> MSI (s) (0C:B0) [17:15:59:357]: Product: Microsoft Application Center
> 2000 SP2 -- Error  1722. An error occurred while performing the
> task.There is a problem with this Windows Installer package. A program
> run as part of the setup did not finish as expected. Contact your
> support personnel or package vendor.  Action register_plogcons.dll,
> location: C:\Program Files\Microsoft Application Center\plsetup.exe,
> command: -install
>
> Action ended 17:15:59: InstallFinalize. Return value 3.
>
> George Cheng [MSFT] wrote: 
>
>
>
> --
> sdmoore
> ------------------------------------------------------------------------
> Posted via http://www.webservertalk.com
> ------------------------------------------------------------------------
> View this thread: http://www.webservertalk.com/message315681.html
>

[ Post a follow-up to this message ]