Every once in a while (sometimes once a day, sometimes more often) I get thi
s
error report in BizTalk Administrator "Cannot retrieve list of objects due t
o
a WMI provider failure. Access denied."
When this happens, it also becomes impossible to acces ports thru the
BizTalk Explorer in Studio.
Has anyone seen this error before? And resolved it?
(BizTalk 2004, W2K3, BTS+SQLServer on one machine install)

[ Post a follow-up to this message ]

I was able to find a case similar to this and here were the steps performed 
toward
resolution.  The support engineer was unable to reproduce the behavior and t
his was
documented as the solution.

Confirm that the remote procedure call(RPC) Locator properties is set to run
 under
the Networkservice account (which is the default).

Unconfigure Biztalk 2004 by running configframework /u and then reconfigure
Biztalk by running configframework.


Mike Vallier
Microsoft BizTalk Support Professional

- A good backup is the key to success; you never know when you might need on
e -

Note: This posting is provided "AS IS" with no warranties, and confers no ri
ghts.
Microsoft Corporation Copyright 2004
All Rights Reserved

--------------------
Thread-Topic: Error in BizTalk Administrator
thread-index: AcSFE8QQT02I3NPiT7aFybPiBsKe9g==
X-WBNR-Posting-Host: 62.58.36.58
From: examnotes <danybelinfante@discussions.microsoft
.com>
Subject: Error in BizTalk Administrator
Date: Wed, 18 Aug 2004 04:09:01 -0700
Lines: 7
Message-ID: <84B6046D-00D1-4F42-8D6F-40802650715D@microsoft.com>
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.biztalk.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa06.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa06.phx.gbl microsoft.public.biztalk.general:18563
X-Tomcat-NG: microsoft.public.biztalk.general

Every once in a while (sometimes once a day, sometimes more often) I get thi
s
error report in BizTalk Administrator "Cannot retrieve list of objects due t
o
a WMI provider failure. Access denied."
When this happens, it also becomes impossible to acces ports thru the
BizTalk Explorer in Studio.
Has anyone seen this error before? And resolved it?
(BizTalk 2004, W2K3, BTS+SQLServer on one machine install)

[ Post a follow-up to this message ]

I checked the RPC Locator account, and it was set correctly.
I do not intend to rerun ConfigFramework when there's no reason to assume
the problem will not reoccur after that.
I AM able to reproduce the behaviour, just unable (as is everyone else) to
explain it.
Rerunning ConfigFramework is tedious and enormously timeconsuming
considering the present installation. This is the best advice available?

"Mike V" wrote:

> I was able to find a case similar to this and here were the steps performe
d toward
> resolution.  The support engineer was unable to reproduce the behavior and
 this was
> documented as the solution.
>
> Confirm that the remote procedure call(RPC) Locator properties is set to r
un under
> the Networkservice account (which is the default).
>
> Unconfigure Biztalk 2004 by running configframework /u and then reconfigur
e
> Biztalk by running configframework.
>
>
> Mike Vallier
> Microsoft BizTalk Support Professional
>
> - A good backup is the key to success; you never know when you might need 
one -
>
> Note: This posting is provided "AS IS" with no warranties, and confers no 
rights.
> Microsoft Corporation Copyright 2004
> All Rights Reserved
>
> --------------------
> Thread-Topic: Error in BizTalk Administrator
> thread-index: AcSFE8QQT02I3NPiT7aFybPiBsKe9g==
> X-WBNR-Posting-Host: 62.58.36.58
> From: examnotes <danybelinfante@discussions.microso
ft.com>
> Subject: Error in BizTalk Administrator
> Date: Wed, 18 Aug 2004 04:09:01 -0700
> Lines: 7
> Message-ID: <84B6046D-00D1-4F42-8D6F-40802650715D@microsoft.com>
> MIME-Version: 1.0
> Content-Type: text/plain;
> 	charset="Utf-8"
> Content-Transfer-Encoding: 7bit
> X-Newsreader: Microsoft CDO for Windows 2000
> Content-Class: urn:content-classes:message
> Importance: normal
> Priority: normal
> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
> Newsgroups: microsoft.public.biztalk.general
> NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
> Path: cpmsftngxa06.phx.gbl!TK2MSFTNGXA03.phx.gbl
> Xref: cpmsftngxa06.phx.gbl microsoft.public.biztalk.general:18563
> X-Tomcat-NG: microsoft.public.biztalk.general
>
> Every once in a while (sometimes once a day, sometimes more often) I get t
his
> error report in BizTalk Administrator "Cannot retrieve list of objects due
 to
> a WMI provider failure. Access denied."
> When this happens, it also becomes impossible to acces ports thru the
> BizTalk Explorer in Studio.
> Has anyone seen this error before? And resolved it?
> (BizTalk 2004, W2K3, BTS+SQLServer on one machine install)
>
>
>
>

[ Post a follow-up to this message ]

Is the machine in a domain OU with any group policies applied?
Have you confirmed WMI health by running WBEMTEST and connecting to the
BizTalk namespace?
Is this an intermittent problem or is action required for you to see
objects in the BizTalk
Administrator?
If so, what action do you perform to regain functionality?


Mike Vallier
Microsoft BizTalk Support Professional

- A good backup is the key to success; you never know when you might need
one -


Note: This posting is provided "AS IS" with no warranties, and confers no
rights.
Microsoft Corporation Copyright 2004
All Rights Reserved

--------------------
Thread-Topic: Error in BizTalk Administrator
thread-index: AcSF2HZbtoAC+FEbQ3GH+jA9lj7MHQ==
X-WBNR-Posting-Host: 62.58.36.58
From: examnotes
<danybelinfante@discussions.microsoft.com>
References:  <84B6046D-00D1-4F42-8D6F-40802650715D@microsoft.com>
<jJfdneShEHA.2416@cpmsftngxa06.phx.gbl>
Subject: RE: Error in BizTalk Administrator
Date: Thu, 19 Aug 2004 03:37:01 -0700
Lines: 65
Message-ID: <1729F4FB-B830-4D78-B509-89FD67424275@microsoft.com>
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.biztalk.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.biztalk.general:18804
X-Tomcat-NG: microsoft.public.biztalk.general

I checked the RPC Locator account, and it was set correctly.
I do not intend to rerun ConfigFramework when there's no reason to assume
the problem will not reoccur after that.
I AM able to reproduce the behaviour, just unable (as is everyone else) to
explain it.
Rerunning ConfigFramework is tedious and enormously timeconsuming
considering the present installation. This is the best advice available?

"Mike V" wrote:

> I was able to find a case similar to this and here were the steps
performed toward
> resolution.  The support engineer was unable to reproduce the behavior
and this was
> documented as the solution.
>
> Confirm that the remote procedure call(RPC) Locator properties is set to
run under
> the Networkservice account (which is the default).
>
> Unconfigure Biztalk 2004 by running configframework /u and then
reconfigure
> Biztalk by running configframework.
>
>
> Mike Vallier
> Microsoft BizTalk Support Professional
>
> - A good backup is the key to success; you never know when you might need
one -
>
> Note: This posting is provided "AS IS" with no warranties, and confers no
rights.
> Microsoft Corporation Copyright 2004
> All Rights Reserved
>
> --------------------
> Thread-Topic: Error in BizTalk Administrator
> thread-index: AcSFE8QQT02I3NPiT7aFybPiBsKe9g==
> X-WBNR-Posting-Host: 62.58.36.58
> From: examnotes
<danybelinfante@discussions.microsoft.com>
> Subject: Error in BizTalk Administrator
> Date: Wed, 18 Aug 2004 04:09:01 -0700
> Lines: 7
> Message-ID: <84B6046D-00D1-4F42-8D6F-40802650715D@microsoft.com>
> MIME-Version: 1.0
> Content-Type: text/plain;
> 	charset="Utf-8"
> Content-Transfer-Encoding: 7bit
> X-Newsreader: Microsoft CDO for Windows 2000
> Content-Class: urn:content-classes:message
> Importance: normal
> Priority: normal
> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
> Newsgroups: microsoft.public.biztalk.general
> NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
> Path: cpmsftngxa06.phx.gbl!TK2MSFTNGXA03.phx.gbl
> Xref: cpmsftngxa06.phx.gbl microsoft.public.biztalk.general:18563
> X-Tomcat-NG: microsoft.public.biztalk.general
>
> Every once in a while (sometimes once a day, sometimes more often) I get
this
> error report in BizTalk Administrator "Cannot retrieve list of objects
due to
> a WMI provider failure. Access denied."
> When this happens, it also becomes impossible to acces ports thru the
> BizTalk Explorer in Studio.
> Has anyone seen this error before? And resolved it?
> (BizTalk 2004, W2K3, BTS+SQLServer on one machine install)
>
>
>
>

[ Post a follow-up to this message ]

quote:
Originally posted by dany belinfante 
Every once in a while (sometimes once a day, sometimes more often) I get thi
s
error report in BizTalk Administrator "Cannot retrieve list of objects due t
o
a WMI provider failure. Access denied."
When this happens, it also becomes impossible to acces ports thru the
BizTalk Explorer in Studio.
Has anyone seen this error before? And resolved it?
(BizTalk 2004, W2K3, BTS+SQLServer on one machine install) 

[ Post a follow-up to this message ]

quote:
Originally posted by svandijck 
 
 

Hi all,

I am working with the same config as you mentioned in this thread, Biztalk W
S2003 etc. I experience exactly the same problem. 
I checked the setting of the SSO server also, since in some other threads th
at is menioned as a possible trouble spot. But that is set correctly, and al
l services involved are running...
The only thing we seem to be able to do is reboot the machine and things may
be just fine for a couple of hours. We get the problem at least once every 2
4 hrs. We are running in a life plant, so a solution is really needed ASAP. 
This is my last resort before I ring the bell at Microsoft for this one.

Did you find any definite solution to this issue?

Txs
Stephan

[ Post a follow-up to this message ]