Dear all,
I have an orchestration deployed and published as web service. I'm able to
communicate with it and excecute the business process, but when I should
receive
the result I have the subsequend error in the Event Viewer of BizTalk:

Source: BizTalk Server 2004
Category: BizTalk Server 2004
Time: 3:00:00 PM
Type: Error
User: N/A
Event ID: 5720
There was a failure executing the send pipeline:
"Microsoft.BizTalk.DefaultPipelines.XMLTransmit" Source: "mscorlib" Send
Port:
"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_In_Ou
t_Port.asmx" Reason: Cannot find the assembly
Microsoft.BizTalk.Pipeline.Components, Version=3.0.1.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35.

Source: BizTalk Server 2004
Category: BizTalk Server 2004
Time: 3:00:01 PM
Type: Error
User: N/A
Event ID: 5680
The Messaging Engine has suspended "1" message(s) due to outbound processing
errors. Please use Health and Activity Tracking to determine the cause of
this failure.

Source: BizTalk Server 2004
Category: BizTalk Server 2004
Time: 3:00:02 PM
Type: Error
User: N/A
Event ID: 5754
The "SOAP" adapter is suspending an outbound message going to destination
URL:"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_I
n_Out_Port.asmx". Details:"Exception of type
System.Runtime.InteropServices.COMException was thrown.".

Source: BizTalk Server 2004
Category: BizTalk Server 2004
Time: 3:00:03 PM
Type: Error
User: N/A
Event ID: 5752
The Messaging Engine has suspended "1" message(s) from adapter "SOAP" due to
failures in message processing. Please refer to Health and Activity Tracking
tool for more detailed information on this failure.

In the debug window of HAT the orchestration istance is "Active", all
messages have been transmitted right. Into the web service of the
orchestration exposed I catch a System.Web.Services.Protocols.SoapException
with message field and <detail> field void. If I catch a generic exception I
receive "Internal SOAP Exception".

Have some idea on how to solve the problem?

Thanks,
Aniello.

[ Post a follow-up to this message ]

Looks like BizTalk is not able to find the following component

Microsoft.BizTalk.Pipeline.Components, Version=3.0.1.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35.

in the BizTalk installation directory under the Pipeline Components folder.
Please verify that this assembly is there and has the same version and
public key token as the error mentions.

Regards
Dev

"Aniello" <aniello> wrote in message
news:eUz1%23aRiEHA.3988@tk2msftngp13.phx.gbl...
> Dear all,
> I have an orchestration deployed and published as web service. I'm able to
> communicate with it and excecute the business process, but when I should
> receive
> the result I have the subsequend error in the Event Viewer of BizTalk:
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:00 PM
> Type: Error
> User: N/A
> Event ID: 5720
> There was a failure executing the send pipeline:
> "Microsoft.BizTalk.DefaultPipelines.XMLTransmit" Source: "mscorlib" Send
> Port:
>
"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_In_Ou
> t_Port.asmx" Reason: Cannot find the assembly
> Microsoft.BizTalk.Pipeline.Components, Version=3.0.1.0, Culture=neutral,
> PublicKeyToken=31bf3856ad364e35.
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:01 PM
> Type: Error
> User: N/A
> Event ID: 5680
> The Messaging Engine has suspended "1" message(s) due to outbound
processing
> errors. Please use Health and Activity Tracking to determine the cause of
> this failure.
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:02 PM
> Type: Error
> User: N/A
> Event ID: 5754
> The "SOAP" adapter is suspending an outbound message going to destination
>
URL:"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_I
> n_Out_Port.asmx". Details:"Exception of type
> System.Runtime.InteropServices.COMException was thrown.".
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:03 PM
> Type: Error
> User: N/A
> Event ID: 5752
> The Messaging Engine has suspended "1" message(s) from adapter "SOAP" due
to
> failures in message processing. Please refer to Health and Activity
Tracking
> tool for more detailed information on this failure.
>
> In the debug window of HAT the orchestration istance is "Active", all
> messages have been transmitted right. Into the web service of the
> orchestration exposed I catch a
System.Web.Services.Protocols.SoapException
> with message field and <detail> field void. If I catch a generic exception
I
> receive "Internal SOAP Exception".
>
> Have some idea on how to solve the problem?
>
> Thanks,
> Aniello.
>
>

[ Post a follow-up to this message ]

try the passthrough pipeline for web services.

matt


"Aniello" <aniello> wrote in message
news:eUz1%23aRiEHA.3988@tk2msftngp13.phx.gbl...
> Dear all,
> I have an orchestration deployed and published as web service. I'm able to
> communicate with it and excecute the business process, but when I should
> receive
> the result I have the subsequend error in the Event Viewer of BizTalk:
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:00 PM
> Type: Error
> User: N/A
> Event ID: 5720
> There was a failure executing the send pipeline:
> "Microsoft.BizTalk.DefaultPipelines.XMLTransmit" Source: "mscorlib" Send
> Port:
>
"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_In_Ou
> t_Port.asmx" Reason: Cannot find the assembly
> Microsoft.BizTalk.Pipeline.Components, Version=3.0.1.0, Culture=neutral,
> PublicKeyToken=31bf3856ad364e35.
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:01 PM
> Type: Error
> User: N/A
> Event ID: 5680
> The Messaging Engine has suspended "1" message(s) due to outbound
processing
> errors. Please use Health and Activity Tracking to determine the cause of
> this failure.
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:02 PM
> Type: Error
> User: N/A
> Event ID: 5754
> The "SOAP" adapter is suspending an outbound message going to destination
>
URL:"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_I
> n_Out_Port.asmx". Details:"Exception of type
> System.Runtime.InteropServices.COMException was thrown.".
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:03 PM
> Type: Error
> User: N/A
> Event ID: 5752
> The Messaging Engine has suspended "1" message(s) from adapter "SOAP" due
to
> failures in message processing. Please refer to Health and Activity
Tracking
> tool for more detailed information on this failure.
>
> In the debug window of HAT the orchestration istance is "Active", all
> messages have been transmitted right. Into the web service of the
> orchestration exposed I catch a
System.Web.Services.Protocols.SoapException
> with message field and <detail> field void. If I catch a generic exception
I
> receive "Internal SOAP Exception".
>
> Have some idea on how to solve the problem?
>
> Thanks,
> Aniello.
>
>

[ Post a follow-up to this message ]

Thanks Dev,
the dll Microsoft.BizTalk.Pipeline.Components, Version=3.0.1.0 is inside the
right Pipeline Components folder and its version is also right, but I don't
know how to check its PublicKeyToken.

Regards,
Aniello.

"Devdutt Patnaik" <devdutt.patnaik@amicore.com> wrote in message
news:uEeMq1RiEHA.3320@TK2MSFTNGP11.phx.gbl...
> Looks like BizTalk is not able to find the following component
>
> Microsoft.BizTalk.Pipeline.Components, Version=3.0.1.0, Culture=neutral,
> PublicKeyToken=31bf3856ad364e35.
>
> in the BizTalk installation directory under the Pipeline Components
folder.
> Please verify that this assembly is there and has the same version and
> public key token as the error mentions.
>
> Regards
> Dev
>
> "Aniello" <aniello> wrote in message
> news:eUz1%23aRiEHA.3988@tk2msftngp13.phx.gbl... 
to[vbcol=seagreen] 
>
"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_In_Ou
 
> processing 
of[vbcol=seagreen] 
destination[vbcol=seagreen] 
>
URL:"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_I
 
due[vbcol=seagreen]
> to 
> Tracking 
> System.Web.Services.Protocols.SoapException 
exception[vbcol=seagreen]
> I 
>
>

[ Post a follow-up to this message ]

Matt, using the passthrough pipeline doesn't works, I have already tried.
In the BizTalk event log I receive the subsequent errors:

Source: BizTalk Server 2004
Category: BizTalk Server 2004
Time: 3:00:00 PM
Type: Error
User: N/A
Event ID: 5757
The Messaging Engine encountered an error committing a transport adapters
batch containing the following work items: SOAP messages to be published, 0
request-response messages to be published, 1 messages to be suspended, 0
messages to be deleted from a host queue, 0 messages to be resubmitted for
later transmission, 0 messages to be moved to their backup transport. Please
refer to Health and Activity Tracking tool for more detailed information on
this failure.

Source: BizTalk Server 2004
Category: BizTalk Server 2004
Time: 3:00:01 PM
Type: Error
User: N/A
Event ID: 5778
The Messaging engine failed to process a message submitted by adapter:SOAP
Source
URL:/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_In
_Out_Port.asmx. Details:Could not find a matching subscription for the
message. . This error occurs if the subscribed orchestration schedule or
send port has not been started, or if some of the message properties
necessary for subscription evaluation have not been promoted. Please refer
to Health and Activity Tracking tool for more detailed information on this
failure

Source: BizTalk Server 2004
Category: BizTalk Server 2004
Time: 3:00:02 PM
Type: Error
User: N/A
Event ID: 5753

The "SOAP" adapter is suspending a message coming from Source
URL:"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_I
n_Out_Port.asmx". Details:"The Messaging Engine encountered an error
committing a transport adapters batch. Please refer to Health and Activity
Tracking tool for more detailed information on this failure. ".

Source: BizTalk Server 2004
Category: BizTalk Server 2004
Time: 3:00:03 PM
Type: Error
User: N/A
Event ID: 5752
The Messaging Engine has suspended "1" message(s) from adapter "SOAP" due to
failures in message processing. Please refer to Health and Activity Tracking
tool for more detailed information on this failure.

Into the HAT I don't see anything that allow to understand me how to solve
the problem, furthermore in the client used to invoke the web service of the
orchestration exposed I receive a SOAP exception with the field <detail>
void and no error messages.

Regards,
Aniello.

"Matt Milner" <matt.milner@m3technologypartners dot com> wrote in message
news:Om34wwViEHA.3288@TK2MSFTNGP10.phx.gbl...
> try the passthrough pipeline for web services.
>
> matt
>
>
> "Aniello" <aniello> wrote in message
> news:eUz1%23aRiEHA.3988@tk2msftngp13.phx.gbl... 
to[vbcol=seagreen] 
>
"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_In_Ou
 
> processing 
of[vbcol=seagreen] 
destination[vbcol=seagreen] 
>
URL:"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_I
 
due[vbcol=seagreen]
> to 
> Tracking 
> System.Web.Services.Protocols.SoapException 
exception[vbcol=seagreen]
> I 
>
>

[ Post a follow-up to this message ]

Hi Aniello,

This is how you can diagnose routing failures. These 3 steps almost always
work for me.

1) Check whether you have installed the incoming message more than once (in
different dll's etc)

2) If not, then create a custom receive pipeline with just an XML Validator
component in the validate region. Configure this component to check against
your incoming schema. (This step specifies EXACTLY which schema to use for
the message and removes any confusion for BTS). Go through the usual steps
for deploying the pipeline and use it with the SOAP Receive port. Don't
forget to restart services after each new deployment. And check whether the
receive port is actually using your custom pipeline. This is because if you
want to modify your pipeline and undeploy the dll, the recieve port using
it, defaults to PassThru and we tend to forget changing it back to our
pipeline after re-deployment.

(You should not need step 3 unless you are using correlation, but maybe for
future reference
3a) If step 2 does not work for you, then run \Program Files\Microsoft
BizTalk Server  2004\SDK\Utilities\BTSSubscriptionViewer
.exe and click on the
orchestration you are trying to run (the orch which is exposed as a Web
Service I presume). The lower pane will show you the subscription evaluation
parameters for the orchestration.
3b) Now go to HAT, where you will find 2 entries for a failed subscription.
One of those entries says something like:
"Routing failure report : This instance exists for debugging routing
failures".
Right-click that record and click Service Details.You get another window
called Service Instance Details with 1 record. Right click this record and
select Message Details. You will see a field called Context, which is a
collection. Expand that field and you will see all the Message Context
Properties at the time of routing failure.
Now, check whether all the parameters that are specified in step 3a are
PRESENT and PROMOTED.

Regards
Dev


"Aniello" <aniello> wrote in message
news:OFuUJebiEHA.2400@tk2msftngp13.phx.gbl...
> Matt, using the passthrough pipeline doesn't works, I have already tried.
> In the BizTalk event log I receive the subsequent errors:
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:00 PM
> Type: Error
> User: N/A
> Event ID: 5757
> The Messaging Engine encountered an error committing a transport adapters
> batch containing the following work items: SOAP messages to be published,
0
> request-response messages to be published, 1 messages to be suspended, 0
> messages to be deleted from a host queue, 0 messages to be resubmitted for
> later transmission, 0 messages to be moved to their backup transport.
Please
> refer to Health and Activity Tracking tool for more detailed information
on
> this failure.
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:01 PM
> Type: Error
> User: N/A
> Event ID: 5778
> The Messaging engine failed to process a message submitted by adapter:SOAP
> Source
>
URL:/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_In
> _Out_Port.asmx. Details:Could not find a matching subscription for the
> message. . This error occurs if the subscribed orchestration schedule or
> send port has not been started, or if some of the message properties
> necessary for subscription evaluation have not been promoted. Please refer
> to Health and Activity Tracking tool for more detailed information on this
> failure
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:02 PM
> Type: Error
> User: N/A
> Event ID: 5753
>
> The "SOAP" adapter is suspending a message coming from Source
>
URL:"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_I
> n_Out_Port.asmx". Details:"The Messaging Engine encountered an error
> committing a transport adapters batch. Please refer to Health and Activity
> Tracking tool for more detailed information on this failure. ".
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:03 PM
> Type: Error
> User: N/A
> Event ID: 5752
> The Messaging Engine has suspended "1" message(s) from adapter "SOAP" due
to
> failures in message processing. Please refer to Health and Activity
Tracking
> tool for more detailed information on this failure.
>
> Into the HAT I don't see anything that allow to understand me how to solve
> the problem, furthermore in the client used to invoke the web service of
the
> orchestration exposed I receive a SOAP exception with the field <detail>
> void and no error messages.
>
> Regards,
> Aniello.
>
> "Matt Milner" <matt.milner@m3technologypartners dot com> wrote in message
> news:Om34wwViEHA.3288@TK2MSFTNGP10.phx.gbl... 
able[vbcol=seagreen]
> to 
should[vbcol=seagreen] 
Send[vbcol=seagreen] 
>
"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_In_Ou
 
Culture=neutral,[vbcol=seagreen] 
> of 
> destination 
>
URL:"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_I
 
> due 
> exception 
>
>

[ Post a follow-up to this message ]

Hello Aniello, i have been reading your posts about the error B1030, using
the tool to import a bpel that use a webservice. I'm using this tool and i
have the same proble, if you have an aidea to solve this, can you send me th
e
solution?

Thanks in advance.

"Aniello" wrote:

> Matt, using the passthrough pipeline doesn't works, I have already tried.
> In the BizTalk event log I receive the subsequent errors:
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:00 PM
> Type: Error
> User: N/A
> Event ID: 5757
> The Messaging Engine encountered an error committing a transport adapters
> batch containing the following work items: SOAP messages to be published, 
0
> request-response messages to be published, 1 messages to be suspended, 0
> messages to be deleted from a host queue, 0 messages to be resubmitted for
> later transmission, 0 messages to be moved to their backup transport. Plea
se
> refer to Health and Activity Tracking tool for more detailed information o
n
> this failure.
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:01 PM
> Type: Error
> User: N/A
> Event ID: 5778
> The Messaging engine failed to process a message submitted by adapter:SOAP
> Source
> URL:/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_
In
> _Out_Port.asmx. Details:Could not find a matching subscription for the
> message. . This error occurs if the subscribed orchestration schedule or
> send port has not been started, or if some of the message properties
> necessary for subscription evaluation have not been promoted. Please refer
> to Health and Activity Tracking tool for more detailed information on this
> failure
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:02 PM
> Type: Error
> User: N/A
> Event ID: 5753
>
> The "SOAP" adapter is suspending a message coming from Source
> URL:"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning
_I
> n_Out_Port.asmx". Details:"The Messaging Engine encountered an error
> committing a transport adapters batch. Please refer to Health and Activity
> Tracking tool for more detailed information on this failure. ".
>
> Source: BizTalk Server 2004
> Category: BizTalk Server 2004
> Time: 3:00:03 PM
> Type: Error
> User: N/A
> Event ID: 5752
> The Messaging Engine has suspended "1" message(s) from adapter "SOAP" due 
to
> failures in message processing. Please refer to Health and Activity Tracki
ng
> tool for more detailed information on this failure.
>
> Into the HAT I don't see anything that allow to understand me how to solve
> the problem, furthermore in the client used to invoke the web service of t
he
> orchestration exposed I receive a SOAP exception with the field <detail>
> void and no error messages.
>
> Regards,
> Aniello.
>
> "Matt Milner" <matt.milner@m3technologypartners dot com> wrote in message
> news:Om34wwViEHA.3288@TK2MSFTNGP10.phx.gbl... 
> to 
> "/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_In_
Ou 
> of 
> destination 
> URL:"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning
_I 
> due 
> exception 
>
>
>

[ Post a follow-up to this message ]

Hello Jose,
I'm sorry but at the moment I haven't solved the problem. Some developers of
microsoft have given me some inputs, but with any right solutions.
At the moment seems that anyone is able to solve or work around the problem.
If I know something I will keep informed you and the newsgroup.
Regards,
Aniello.

"Jose Luis" <JoseLuis@discussions.microsoft.com> wrote in message
news:F246B453-9E21-44E0-A0AE-E980D8108BB0@microsoft.com...
> Hello Aniello, i have been reading your posts about the error B1030, using
> the tool to import a bpel that use a webservice. I'm using this tool and i
> have the same proble, if you have an aidea to solve this, can you send me
the[vbcol=seagreen]
> solution?
>
> Thanks in advance.
>
> "Aniello" wrote:
> 
tried.[vbcol=seagreen] 
adapters[vbcol=seagreen] 
published, 0[vbcol=seagreen] 
for[vbcol=seagreen] 
Please[vbcol=seagreen] 
on[vbcol=seagreen] 
adapter:SOAP[vbcol=seagreen] 
URL:/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_In[vbcol=seagreen]
 
refer[vbcol=seagreen] 
this[vbcol=seagreen] 
URL:"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_I[vbcol=seagreen]
 
Activity[vbcol=seagreen] 
due to[vbcol=seagreen] 
Tracking[vbcol=seagreen] 
solve[vbcol=seagreen] 
the[vbcol=seagreen] 
message[vbcol=seagreen] 
able[vbcol=seagreen] 
should[vbcol=seagreen] 
BizTalk:[vbcol=seagreen] 
Send[vbcol=seagreen] 
"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_In_Ou[vbcol=seagreen]
 
Culture=neutral,[vbcol=seagreen] 
cause[vbcol=seagreen] 
URL:"/ElearningTestBed_Proxy/ ElearningTestBed_OrchestratorBL_Bis_Elea
rning_I[vbcol=seagreen]
 
"SOAP"[vbcol=seagreen] 
all[vbcol=seagreen] 

[ Post a follow-up to this message ]

Hello,

Looks like BizTalk cannot find the
Microsoft.BizTalk.Pipeline.Components assembly. Please make sure that
the file exists in the Pipeline Components directory and that the
assembly is deployed in the Global Assembly Cache.

1) To check that the assembly is deployed in the GAC type:
%windir%\Microsoft.NET\Framework\version\gacutil.exe -l
Microsoft.BizTalk.Pipeline.Components

2) If the assembly is not deployed then deploy it:
%windir%\Microsoft.NET\Framework\version\gacutil.exe -l
%BizTalkHomeDirectory%\Pipeline
Components\Microsoft.BizTalk.Pipeline.Components.dll


HTH,
Darin

[vbcol=seagreen] 
Send[vbcol=seagreen] 
Culture=neutral,[vbcol=seagreen] 

[ Post a follow-up to this message ]