I have installed an SSL Certificate on a Windows 2000 Server.

On the Default Web Site properties I add port 443 to the SSL Port but did
not require SSL for the etinre site.

On a sub folder I set Secure Communications to require SSL.

When attempting to connect to a web page on the sub folder with "http" I do
get the error message that "The page must be viewed over a secure channel"
HTTP 403.4 error message, that is good.

When I attemp to connect using "https" I get "The page you are looking for
is currently unavailable." page and at the botton of the page it reads
"Cannot find server or DNS Error - Internet Explorer"

If I remove SSL required I can connect to the page using "http".

Any advice to steer me in the right direction is apprciated.

Thanks,

Steve Santos
ssantos@csuchico.edu

[ Post a follow-up to this message ]

Hi Steve,

Run this tool on your server. It should tell you if there are any
configuration or certificate problems that you need to resolve.

SSL Diagnostics Version 1.0 (x86)
http://www.microsoft.com/downloads/...&DisplayLang=en

Mike

"Steve Santos" <ssantos@csuchico.edu> wrote in message
news:JgF3d.23642$di6.12480@newssvr29.news.prodigy.com...
> I have installed an SSL Certificate on a Windows 2000 Server.
>
> On the Default Web Site properties I add port 443 to the SSL Port but did
> not require SSL for the etinre site.
>
> On a sub folder I set Secure Communications to require SSL.
>
> When attempting to connect to a web page on the sub folder with "http" I
do
> get the error message that "The page must be viewed over a secure channel"
> HTTP 403.4 error message, that is good.
>
> When I attemp to connect using "https" I get "The page you are looking for
> is currently unavailable." page and at the botton of the page it reads
> "Cannot find server or DNS Error - Internet Explorer"
>
> If I remove SSL required I can connect to the page using "http".
>
> Any advice to steer me in the right direction is apprciated.
>
> Thanks,
>
> Steve Santos
> ssantos@csuchico.edu
>
>

[ Post a follow-up to this message ]

Yes, I did run SSL Diags but have been unable to track down the mesage:
"#WARNING:Connecting to server: 0x274d (10061) " error that I get in several
areas.

The only different from the one above is in the ServerState:
"#WARNING:Incorrect SecureBindings"

Trying to track that down also.

--Steve



"Miha Pihler" <mihap-news@atlantis.si> wrote in message
news:eHIbaM1nEHA.2024@TK2MSFTNGP09.phx.gbl...
> Hi Steve,
>
> Run this tool on your server. It should tell you if there are any
> configuration or certificate problems that you need to resolve.
>
> SSL Diagnostics Version 1.0 (x86)
>
http://www.microsoft.com/downloads/... />
layLang=en
>
> Mike
>
> "Steve Santos" <ssantos@csuchico.edu> wrote in message
> news:JgF3d.23642$di6.12480@newssvr29.news.prodigy.com... 
did[vbcol=seagreen] 
> do 
channel"[vbcol=seagreen] 
for[vbcol=seagreen] 
>
>

[ Post a follow-up to this message ]

check the ssl port binding again.. is it 443 ?

try
PRB: Error "Page Cannot Be Displayed" When You Connect Through HTTPS
http://support.microsoft.com/?id=290391

HOW TO: Determine If SSL Connectivity Is Not Working on the Web Server or on
an Intermediate Device
http://support.microsoft.com/?id=290051

"Cannot find server" or "DNS" Errors When Using SSL (Q & A)
http://support.microsoft.com/?id=292296

at command prompt, enter
"netstat -an", see anything binding on port 443 ?

anything in event log ?


--
Regards,
Bernard Cheah
http://www.tryiis.com/
http://support.microsoft.com/
http://www.msmvps.com/bernard/



"Steve Santos" <ssantos@csuchico.edu> wrote in message
news:H5L3d.23796$fH.12372@newssvr29.news.prodigy.com...
> Yes, I did run SSL Diags but have been unable to track down the mesage:
> "#WARNING:Connecting to server: 0x274d (10061) " error that I get in
several
> areas.
>
> The only different from the one above is in the ServerState:
> "#WARNING:Incorrect SecureBindings"
>
> Trying to track that down also.
>
> --Steve
>
>
>
> "Miha Pihler" <mihap-news@atlantis.si> wrote in message
> news:eHIbaM1nEHA.2024@TK2MSFTNGP09.phx.gbl... 
>
http://www.microsoft.com/downloads/... />
layLang=en 
> did 
I[vbcol=seagreen] 
> channel" 
> for 
>
>

[ Post a follow-up to this message ]