Just wondering if anything has been found out regarding this problem.  Is
more information needed?  Any status whatsoever?  This has put a bit of a
crimp in some planned development and any help to resolve this for future
efforts would be appreciated.

"Paul Davidson" wrote:

> Also run depends.exe on Biztalk's provider as well.  <biztalk install
> directory>\BtsWmiProvider.dll
>
> -paul
> --------------------
> Newsgroups: microsoft.public.biztalk.setup
> From: paulda@online.microsoft.com (Paul Davidson)
> Organization: Microsoft
> Date: Thu, 12 Aug 2004 21:27:16 GMT
> Subject: RE: Provider load failure RuleEngineConfig initial installation B
T
> X-Tomcat-NG: microsoft.public.biztalk.setup
> MIME-Version: 1.0
> Content-Type: multipart/alternative;
> boundary="--Next.Tomcat.Message.With.ASCII.and.RTF.8973497230230"
> Content-Transfer-Encoding: 7bit
>
> Robert, can you check the wbem logs in %systemroot%\system32\wbem\logs?
> Also run depends.exe on the WMI provider dll.
> %systemroot%\system32\wbem\wmiprov.dll
>
> depends.exe(dependency walker) is a tool that comes with support tools, VS
> or platform SDK - essentially it should be on a dev box.  Let me know if
> you can't find it.
>
> -paul
> --------------------
> X-Tomcat-ID: 452990167
> References: <3E0283CA-0977-4B52-BC0D-5C9DCBA38C48@microsoft.com>
> <G7AOt1lWEHA.1996@cpmsftngxa10.phx.gbl>
> <31B29B6E-B5A7-4C27-8052-6E403E154416@microsoft.com>
> <vD2PBtweEHA.1576@cpmsftngxa06.phx.gbl>
> <AB2C0F97-4E7A-410F-9750-E88878BFDF33@microsoft.com>
> MIME-Version: 1.0
> Content-Type: multipart/alternative; boundary="----=_NextPart_0001_1727FE5
8"
> Content-Transfer-Encoding: 7bit
> From: paulda@online.microsoft.com (Paul Davidson)
> Organization: Microsoft
> Date: Tue, 10 Aug 2004 17:31:34 GMT
> Subject: RE: Provider load failure RuleEngineConfig initial installation B
T
> X-Tomcat-NG: microsoft.public.biztalk.setup
> Message-ID: <ATj7j$vfEHA.2876@cpmsftngxa06.phx.gbl>
> Newsgroups: microsoft.public.biztalk.setup
> Lines: 1165
> Path: cpmsftngxa06.phx.gbl
> Xref: cpmsftngxa06.phx.gbl microsoft.public.biztalk.setup:4336
> NNTP-Posting-Host: tomcatimport2.phx.gbl 10.201.218.182
>
> Just to let you know, I forwarded on your issue to the feature team to see
> if they can help.  I'll post(or they will) as soon as I hear back from the
m.
>
> -paul
> --------------------
> Thread-Topic: Provider load failure RuleEngineConfig initial installation 
BT
> thread-index: AcR7DhHa4zXQMQv6R8OIFHJNQ35YRA==
> X-WBNR-Posting-Host: 204.153.206.15
> From: "examnotes" <RobertB@discussions.microsoft.com>
> References:  <3E0283CA-0977-4B52-BC0D-5C9DCBA38C48@microsoft.com>
> <G7AOt1lWEHA.1996@cpmsftngxa10.phx.gbl>
> <31B29B6E-B5A7-4C27-8052-6E403E154416@microsoft.com>
> <vD2PBtweEHA.1576@cpmsftngxa06.phx.gbl>
> Subject: RE: Provider load failure RuleEngineConfig initial installation B
T
> Date: Thu, 5 Aug 2004 10:03:03 -0700
> Lines: 444
> Message-ID: <AB2C0F97-4E7A-410F-9750-E88878BFDF33@microsoft.com>
> MIME-Version: 1.0
> Content-Type: text/plain;
> 	charset="Utf-8"
> Content-Transfer-Encoding: 7bit
> X-Newsreader: Microsoft CDO for Windows 2000
> Content-Class: urn:content-classes:message
> Importance: normal
> Priority: normal
> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
> Newsgroups: microsoft.public.biztalk.setup
> NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
> Path: cpmsftngxa06.phx.gbl!TK2MSFTNGXA03.phx.gbl
> Xref: cpmsftngxa06.phx.gbl microsoft.public.biztalk.setup:4304
> X-Tomcat-NG: microsoft.public.biztalk.setup
>
> Thank you for your quick reply.  The kb was 839186. It didn't match the
> hr but the error message ("failed to load configuration data for
> feature: RulesEngine") was the same.  I can't find anything that appears
> directly related in event viewer (I had checked the app and system logs
> previously), however, I did find this:
>
> ======================================
> Event Type:	Warning
> Event Source:	WinMgmt
> Event Category:	None
> Event ID:	47
> Date:		8/5/2004
> Time:		12:21:51 AM
> User:		N/A
> Computer:	WD-ROBERTB-XP
> Description:
> WMI ADAP was unable to retrieve data from the PerfLib subkey:
>  SYSTEM\CurrentControlSet\Services\mssind
ex\Performance\Library, error code
:
> 0x80041009
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
> ======================================
>
> It's the only WMI related message I find and the time it happened is a bit
> off (though I was trying to configure this just before that time,
> unfortunately).  The message also doesn't appear again since that time,
> and I've given it a shot a couple times since then.
>
> As far as the path variables, the system32 and system32/wbem
> are there (I did restart the system at least a couple times in my attempts
> to get the configuration wizard to work, hoping that this would perform
> some voodoo).  I'll admit, I'm real weak on WMI right now, so I'm not
> really sure what to be looking for with that.  If there's any other info
> you need, let me know.
>
> Thanks again.
>
>
> "Paul Davidson" wrote:
> 
> BT 
> BT 
> RulesEngine 
> Configured: 
> Configured: 
> yes 
> Configured: 
> yes 
> WMI 
> installed 
> for: 
> for: 
> for: 
> MOT 
> for: 
> for: 
> for: 
>  c:\depot4000\jupiter\source\private\moza
rt\source\engine\rules\configfwkex
t\ 
>  c:\depot4000\jupiter\source\private\moza
rt\source\engine\rules\configfwkex
t\ 
> to 
> file 
>  c:\depot4000\jupiter\source\private\comm
on\configwizard\exe\jupiterconfigt
oo 
>  c:\depot4000\jupiter\source\private\comm
on\configwizard\exe\jupiterconfigt
oo 
> Configured: 
> Configured: 
> yes 
> Configured: 
> yes 
> Engine 
> SSOServer,Engine 
> ProgID: 
> problems, 
> the 
> The 
> errors 
> installation 
> BTS 
>  c:\depot4000\jupiter\source\private\moza
rt\source\engine\rules\configfwkex
t\ 
>  c:\depot4000\jupiter\source\private\moza
rt\source\engine\rules\configfwkex
t\ 
>  c:\depot4000\jupiter\source\private\comm
on\configwizard\exe\jupiterconfigt
oo 
>  c:\depot4000\jupiter\source\private\comm
on\configwizard\exe\jupiterconfigt
oo 
> Configured: 
>
>
>
>
>

[ Post a follow-up to this message ]