Howdy,

I cannot seem to find my network to restore with Ghost 9 (or Drive
Image 7, or V2i Protector.)

If in Ghost 9 if I boot from the recovery CD and attempt to configure
the network, here's what I get:

The Network configuration dialog shows -

"No network configuration was detected."

The netcard name is displayed correctly, but is grayed out.

IP #1 displays correctly
Subnet #1 displays correctly

IP #2 displays 0.0.0.0.
Subnet #2 displays 0.0.0.0.

How should I proceed to get this thing to see the network properly?

Thanks for any assistance,

--
Kenneth

If you email... Please remove the "SPAMLESS."

[ Post a follow-up to this message ]

Kenneth wrote:
> Howdy,
>
> I cannot seem to find my network to restore with Ghost 9 (or Drive
> Image 7, or V2i Protector.)
>
> If in Ghost 9 if I boot from the recovery CD and attempt to configure
> the network, here's what I get:
>
> The Network configuration dialog shows -
>
> "No network configuration was detected."
>
> The netcard name is displayed correctly, but is grayed out.
>
> IP #1 displays correctly
> Subnet #1 displays correctly
>
> IP #2 displays 0.0.0.0.
> Subnet #2 displays 0.0.0.0.
>
> How should I proceed to get this thing to see the network properly?
>
> Thanks for any assistance,

I had the same issue with the Drive Image 7.04 PQRE: Still I had been able
to access any shared resource in the Utility section (Map network drive)...
(Both LAN and Workgroups (P2P))...As the basics are adapted in the Symantec
RE I assume these steps are alike...?

--
M.f.G.
Michael Kimmer

"Ein Tag an dem Du nicht lächelst ist ein verlorener Tag"
"Eine Nacht in der Du nicht schläfst ist eine verschlafene Nacht"

[ Post a follow-up to this message ]

On Thu, 7 Oct 2004 23:57:56 +0200, "Michael Kimmer"
<michaelkimmer@NOSPAM.xs4all.nl> wrote:

>Kenneth wrote: 
>
>I had the same issue with the Drive Image 7.04 PQRE: Still I had been able
>to access any shared resource in the Utility section (Map network drive)...
>(Both LAN and Workgroups (P2P))...As the basics are adapted in the Symantec
>RE I assume these steps are alike...?

Hi Michael,

I don't know just how to respond to your comment.

As you will see elsewhere in this thread, I have never been able to do
anything over the network after booting from any of the CDs. That is
Drive Image, V2i Protector, or Ghost.

If I get it fixed, we will have a party right here!

All the best,

--
Kenneth

If you email... Please remove the "SPAMLESS."

[ Post a follow-up to this message ]