Hello, I see that there are a lot of people with VPN issues when using
Netgear products.
I am one of those people.
I have been trying all weekend to get this thing to VPN.
Personally I wish my client would spring for the Sonicwall but they are a
bit pricy but they work great and have great support.
Anyhow, to get to my point.
I am trying to use the the greenbow client and used their HOW TO for the
FVS318 and a trial version of their client.
I almost have it working but when I get to phase 2 there seems to be a
problem.
Here is some of  my log file.

152624 Default phase 1 done: initiator id TheGreenBow, responder id netgear
152625 Default initiator_send_HASH_SA_NONCE: Remote-ID given without
Local-ID for "netgear1-netgear2-P2"
152625 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HASH]
[SA] [KEY_EXCH] [NONCE] [ID] [ID]
152632 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HASH]
[SA] [KEY_EXCH] [NONCE] [ID] [ID]
152641 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HASH]
[SA] [KEY_EXCH] [NONCE] [ID] [ID]
152652 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HASH]
[SA] [KEY_EXCH] [NONCE] [ID] [ID]
152705 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HASH]
[SA] [KEY_EXCH] [NONCE] [ID] [ID]
152720 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HASH]
[SA] [KEY_EXCH] [NONCE] [ID] [ID]
152720 Default transport_send_messages: giving up on message 00996DE8

I do not even know what direction to go from here.
Any help would be appreciated.
Thanks in advance.

[ Post a follow-up to this message ]

Hi,

If phase 2 diffie-hellman group is correctly configured
at both ends then your router is discarding the VPN client
phase 2 first message because you missconfigured phase 2
networking options.

Check that client's 'Remote LAN address'/'Subnet Mask' are
identical to Netgear's 'Local LAN start IP address'/'Local
LAN IP subnetmask'. Set 'VPN client address' to 0.0.0.0,
set 'tunnel can access' to 'a single remote a address' and
reset other subfields.

Hope it helps.

Regards,
Kamel Messaoudi
¤ TheGreenBow VPN client R&D team leader
¤ VPN IPsec, firewalling and NDIS drivers expert


"RPL" <rlefeve@nospamwowway.com> wrote in message news:<FrKdnaA0XIOOSe_cRVn-3g@wideopenwest.
com>...
> Hello, I see that there are a lot of people with VPN issues when using
> Netgear products.
> I am one of those people.
> I have been trying all weekend to get this thing to VPN.
> Personally I wish my client would spring for the Sonicwall but they are a
> bit pricy but they work great and have great support.
> Anyhow, to get to my point.
> I am trying to use the the greenbow client and used their HOW TO for the
> FVS318 and a trial version of their client.
> I almost have it working but when I get to phase 2 there seems to be a
> problem.
> Here is some of  my log file.
>
> 152624 Default phase 1 done: initiator id TheGreenBow, responder id netgea
r
> 152625 Default initiator_send_HASH_SA_NONCE: Remote-ID given without
> Local-ID for "netgear1-netgear2-P2"
> 152625 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HAS
H]
> [SA] [KEY_EXCH] [NONCE] [ID] [ID]
> 152632 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HAS
H]
> [SA] [KEY_EXCH] [NONCE] [ID] [ID]
> 152641 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HAS
H]
> [SA] [KEY_EXCH] [NONCE] [ID] [ID]
> 152652 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HAS
H]
> [SA] [KEY_EXCH] [NONCE] [ID] [ID]
> 152705 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HAS
H]
> [SA] [KEY_EXCH] [NONCE] [ID] [ID]
> 152720 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HAS
H]
> [SA] [KEY_EXCH] [NONCE] [ID] [ID]
> 152720 Default transport_send_messages: giving up on message 00996DE8
>
> I do not even know what direction to go from here.
> Any help would be appreciated.
> Thanks in advance.

[ Post a follow-up to this message ]

Did you get this resolved?  I am getting the same messages using the same Gr
eenBow/FSV318.  I only get the message when I am using the client behind the
 Netgear RP614 router.  When I am connected directly to the internet, it wor
ks fine.  Any suggestions?  

quote:
Originally posted by RPL 
Hello, I see that there are a lot of people with VPN issues when using
Netgear products.
I am one of those people.
I have been trying all weekend to get this thing to VPN.
Personally I wish my client would spring for the Sonicwall but they are a
bit pricy but they work great and have great support.
Anyhow, to get to my point.
I am trying to use the the greenbow client and used their HOW TO for the
FVS318 and a trial version of their client.
I almost have it working but when I get to phase 2 there seems to be a
problem.
Here is some of  my log file.

152624 Default phase 1 done: initiator id TheGreenBow, responder id netgear
152625 Default initiator_send_HASH_SA_NONCE: Remote-ID given without
Local-ID for "netgear1-netgear2-P2"
152625 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HASH]
[SA] [KEY_EXCH] [NONCE] [ID] [ID]
152632 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HASH]
[SA] [KEY_EXCH] [NONCE] [ID] [ID]
152641 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HASH]
[SA] [KEY_EXCH] [NONCE] [ID] [ID]
152652 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HASH]
[SA] [KEY_EXCH] [NONCE] [ID] [ID]
152705 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HASH]
[SA] [KEY_EXCH] [NONCE] [ID] [ID]
152720 Default (SA netgear1-netgear2-P2) SEND phase 2 Quick Mode  [HASH]
[SA] [KEY_EXCH] [NONCE] [ID] [ID]
152720 Default transport_send_messages: giving up on message 00996DE8

I do not even know what direction to go from here.
Any help would be appreciated.
Thanks in advance. 

[ Post a follow-up to this message ]

I am getting the same messages using the same GreenBow/FSV318.  I only get t
he message when I am using the client behind the Netgear RP614 router.  When
 I am connected directly to the internet, it works fine.  Any suggestions?

[ Post a follow-up to this message ]