Thanks in advance for any response...

I would like to know how to unplug/disable the usbdevice from redhat9
without physically unpluging it.  The purpose of the is so my usb device,
which is a scanner, can be seen by vmware.

Is there a command that will do this?

The usbmodules command only has these args... Usage: usbmodules [--help]
[--device /proc/bus/usb/NNN/NNN] [--check module]
[--mapfile pathname] [--version]
Lists kernel modules corresponding to USB devices currently plugged into
the computer.
When I run ./usbmodules --device /proc/bus/usb/001/002 I get ... "scanner"
as the result.

The lsusb usage is the following...
usage: lsusb [-v] [-x] [-p <procpath>] [-s [<bus>:][<devnum>]] [-d
[<vendor>]:[<device>]]

here is a copy of my lsusb command... Bus 001 Device 002: ID 03f0:0405
Hewlett-Packard ScanJet 3400cse Device Descriptor:
bLength                18
bDescriptorType         1
bcdUSB               1.00
bDeviceClass            0 Interface
bDeviceSubClass         0
bDeviceProtocol         0
bMaxPacketSize0         8
idVendor           0x03f0 Hewlett-Packard idProduct          0x0405
ScanJet 3400cse bcdDevice            0.00
iManufacturer          10 Hewlett-Packard iProduct               11
Hewlett-Packard ScanJet 3400C iSerial                12 CN08L1D0KVTG
bNumConfigurations      1
Configuration Descriptor:
bLength                 9
bDescriptorType         2
wTotalLength           39
bNumInterfaces          1
bConfigurationValue     1
iConfiguration          0
bmAttributes         0x40
Self Powered
MaxPower               48mA
Interface Descriptor:
bLength                 9
bDescriptorType         4
bInterfaceNumber        0
bAlternateSetting       0
bNumEndpoints           3
bInterfaceClass        16
bInterfaceSubClass      1
bInterfaceProtocol      0
iInterface              0
Endpoint Descriptor:
bLength                 7
bDescriptorType         5
bEndpointAddress     0x81  EP 1 IN
bmAttributes            2
Transfer Type            Bulk
Synch Type               none
wMaxPacketSize         64
bInterval               0
Endpoint Descriptor:
bLength                 7
bDescriptorType         5
bEndpointAddress     0x02  EP 2 OUT
bmAttributes            2
Transfer Type            Bulk
Synch Type               none
wMaxPacketSize         64
bInterval               0
Endpoint Descriptor:
bLength                 7
bDescriptorType         5
bEndpointAddress     0x83  EP 3 IN
bmAttributes            3
Transfer Type            Interrupt
Synch Type               none
wMaxPacketSize          1
bInterval               8
Language IDs: (length=4)
0409 English(US)

[ Post a follow-up to this message ]

citizenxxx <nandrico@carolina.rr.com> wrote:
quote:

> Thanks in advance for any response...
>
> I would like to know how to unplug/disable the usbdevice from redhat9
> without physically unpluging it.  The purpose of the is so my usb device,
> which is a scanner, can be seen by vmware.
>
> Is there a command that will do this?


[ snip ]

You can't do what you want. The USB standard does not support this
behaviour.

Alexander


--
Alexander Dalloz | Enger, Germany
PGP key valid: made 13.07.1999
PGP fingerprint: 2307 88FD 2D41 038E 7416  14CD E197 6E88 ED69 5653

[ Post a follow-up to this message ]

citizenxxx <nandrico@carolina.rr.com> wrote:
quote:

> Thanks in advance for any response...
>
> I would like to know how to unplug/disable the usbdevice from redhat9
> without physically unpluging it.  The purpose of the is so my usb device,
> which is a scanner, can be seen by vmware.
>
> Is there a command that will do this?


[ snip ]

You can't do what you want. The USB standard does not support this
behaviour.

Alexander


--
Alexander Dalloz | Enger, Germany
PGP key valid: made 13.07.1999
PGP fingerprint: 2307 88FD 2D41 038E 7416  14CD E197 6E88 ED69 5653

[ Post a follow-up to this message ]

citizenxxx <nandrico@carolina.rr.com> wrote:
quote:

> Thanks in advance for any response...
>
> I would like to know how to unplug/disable the usbdevice from redhat9
> without physically unpluging it.  The purpose of the is so my usb device,
> which is a scanner, can be seen by vmware.
>
> Is there a command that will do this?


[ snip ]

You can't do what you want. The USB standard does not support this
behaviour.

Alexander


--
Alexander Dalloz | Enger, Germany
PGP key valid: made 13.07.1999
PGP fingerprint: 2307 88FD 2D41 038E 7416  14CD E197 6E88 ED69 5653

[ Post a follow-up to this message ]

On Wed, 1 Oct 2003, citizenxxx wrote:
quote:

> Thanks in advance for any response...
>
> I would like to know how to unplug/disable the usbdevice from redhat9
> without physically unpluging it.  The purpose of the is so my usb device,
> which is a scanner, can be seen by vmware.
>
> Is there a command that will do this?
>

[snip]

Try the following:

as root: /sbin/rmmod scanner

Then select the usb device under "Device" in the vmware window.

HTH

SG.

[ Post a follow-up to this message ]

On Wed, 1 Oct 2003, citizenxxx wrote:
quote:

> Thanks in advance for any response...
>
> I would like to know how to unplug/disable the usbdevice from redhat9
> without physically unpluging it.  The purpose of the is so my usb device,
> which is a scanner, can be seen by vmware.
>
> Is there a command that will do this?
>

[snip]

Try the following:

as root: /sbin/rmmod scanner

Then select the usb device under "Device" in the vmware window.

HTH

SG.

[ Post a follow-up to this message ]

On Wed, 01 Oct 2003 17:11:58 +0100, SG wrote:

Thanks SG it worked! perfectly!

Thanks again.

WOW

I'll pass this on to a few others that had this same problem.


quote:

> On Wed, 1 Oct 2003, citizenxxx wrote:
> 
> [snip]
>
> Try the following:
>
> as root: /sbin/rmmod scanner
>
> Then select the usb device under "Device" in the vmware window.
>
> HTH
>
> SG.

[ Post a follow-up to this message ]

On Wed, 01 Oct 2003 17:11:58 +0100, SG wrote:

Thanks SG it worked! perfectly!

Thanks again.

WOW

I'll pass this on to a few others that had this same problem.


quote:

> On Wed, 1 Oct 2003, citizenxxx wrote:
> 
> [snip]
>
> Try the following:
>
> as root: /sbin/rmmod scanner
>
> Then select the usb device under "Device" in the vmware window.
>
> HTH
>
> SG.

[ Post a follow-up to this message ]

On Wed, 01 Oct 2003 17:11:58 +0100, SG wrote:

Thanks SG it worked! perfectly!

Thanks again.

WOW

I'll pass this on to a few others that had this same problem.


quote:

> On Wed, 1 Oct 2003, citizenxxx wrote:
> 
> [snip]
>
> Try the following:
>
> as root: /sbin/rmmod scanner
>
> Then select the usb device under "Device" in the vmware window.
>
> HTH
>
> SG.

[ Post a follow-up to this message ]

> Glad that it worked. If you want to do the opposite, then just
quote:

> disconnect from the vmware window (under "Device by selecting "none")
> and type
>
> as root: /sbin/insmod scanner
>
> and you should get control of the scanner in linux then.
>
> HTH
>
> SG.

Thanks for the additional info.  It's a win only hp scanner so I probably
won't need to ever give it back to linux.

But would this also work for usb hard drives or firewire hard drives?

Thanks

[ Post a follow-up to this message ]