I think it's 32 but I just wanted to double check. Is there are there any
RPM's that can make the system go from 16, to 32, then to 64? I am guessing
that is where the kernel needs to be configured right?

Thanks,

KW

[ Post a follow-up to this message ]

KW wrote:
quote:

> I think it's 32 but I just wanted to double check. Is there are there any
> RPM's that can make the system go from 16, to 32, then to 64? I am guessin
g
> that is where the kernel needs to be configured right?
>
> Thanks,
>
> KW
>
>

I am not sure what you are referring to.  Clusters are the disk
allocation unit in the Windows FAT/FAT32 partitions.  The minimum unit
of disk allocation in Linux that would be the closest thing would be the
block.  You can see the size of blocks on your volumes by tuning the
following command:
tune2fs -l /dev/hda2 | grep -i 'block size'

Where you replace the hda2 with the device name of the partition you
want to look at.  According to the ext2 and 3 man pages valid block size
vales are 1024, 2048 and 4096 bytes per block.

--
Thanks
Charles LaCour

[ Post a follow-up to this message ]

On Mon, 29 Dec 2003 17:20:29 -0500 KW wrote:
quote:

> I think it's 32 but I just wanted to double check. Is there are there any
> RPM's that can make the system go from 16, to 32, then to 64? I am guessin
g
> that is where the kernel needs to be configured right?
>
> Thanks,
>
> KW


The kernel has nothing to do with specific partition format. If you speak
about an ext2 filesystem see man mkfs.ext2 for details.

Alexander


--
Alexander Dalloz | Enger, Germany
PGP key valid: made 13.07.1999
PGP fingerprint: 2307 88FD 2D41 038E 7416  14CD E197 6E88 ED69 5653

[ Post a follow-up to this message ]

KW wrote:
quote:

> I think it's 32 but I just wanted to double check. Is there are there any
> RPM's that can make the system go from 16, to 32, then to 64? I am guessin
g
> that is where the kernel needs to be configured right?


WTF?  Clusters are for Winders.  Linux (and all *nixes I'm
familiar with) uses blocksize, which by default is 1KB.

--
Kevin D. Snodgrass
kdsnodgrass (at) yahoo [dot] com

[ Post a follow-up to this message ]

KW wrote:
quote:

> I think it's 32 but I just wanted to double check. Is there are there any
> RPM's that can make the system go from 16, to 32, then to 64? I am guessin
g
> that is where the kernel needs to be configured right?
>
> Thanks,
>
> KW
>
>

I am not sure what you are referring to.  Clusters are the disk
allocation unit in the Windows FAT/FAT32 partitions.  The minimum unit
of disk allocation in Linux that would be the closest thing would be the
block.  You can see the size of blocks on your volumes by tuning the
following command:
tune2fs -l /dev/hda2 | grep -i 'block size'

Where you replace the hda2 with the device name of the partition you
want to look at.  According to the ext2 and 3 man pages valid block size
vales are 1024, 2048 and 4096 bytes per block.

--
Thanks
Charles LaCour

[ Post a follow-up to this message ]