Does anyone have this working? I am trying to connect to an Actiontec
wireless gateway.

I have downloaded the rtl8180 drivers (rtl8180_linuxdrv_v13(gcc3.xx).zip),
unzipped and compiled then installed per directions.

The following is the script I used to to configure and activate. Nothing!!!!

Any suggestions.

I have kernel 2.4.18-4 and gcc version 3.2.

Everyting works in windowxp but not in linux

Thanks in advance.

----------------------
script
#Load module

/sbin/insmod -f rtl8180_24x.o

#Set SSID

/sbin/iwpriv wlan0 wlan_para ssid2scan=home

/sbin/iwpriv wlan0 wlan_para ssid=home

/sbin/iwpriv wlan0 wlan_para networktype=infra



#/sbin/iwpriv wlan0 wlan_para encmode=wep

#/sbin/iwpriv wlan0 wlan_para
 wepmode=wep40,wepdkeyid=0,wepkey40_1=123
4567890



#Enable wireless lan driver

/sbin/iwpriv wlan0 wlan_para channel=6

/sbin/iwpriv wlan0 wlan_para basicrates=0xf

/sbin/iwpriv wlan0 wlan_para oprates=0xf

/sbin/iwpriv wlan0 wlan_para authtype=opensystem

/sbin/iwpriv wlan0 wlan_para wepmode=off

/sbin/iwpriv wlan0 wlan_para rtsthres=2304

/sbin/iwpriv wlan0 wlan_para fragthres=2304

#/sbin/iwpriv wlan0 wlan_para help

/sbin/iwpriv wlan0 enable

#Configure wlan0 IP address

/sbin/ifconfig wlan0 192.168.0.120 netmask 255.255.255.0 broadcast
192.168.0.255

route add -net default gw 192.168.0.1

echo "$(/sbin/ifconfig wlan0)"

[ Post a follow-up to this message ]