01-24-04 12:51 AM
On Mon, 30 Jun 2003 22:02:08 +0200, Alexander Dalloz
<alexander.dalloz@uni-bielefeld.de> wrote:
quote:
>Bob Mariotti <r.mariotti@127.0.0.1> wrote:
>
>
>Insuffician information about graphics card and error log entries.
>
>Alexander
>
>P.S. your email address is invalid
>
>
>--
>Alexander Dalloz | Enger, Germany
>PGP key valid: made 13.07.1999
>PGP fingerprint: 2307 88FD 2D41 038E 7416 14CD E197 6E88 ED69 5653
Well, yes - insufficient information - as my question was "how to get
back to default".
FYI - my graphics card is an on-board VIA Savage2D/3D AGP and the
error log entries are:
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "savage"
(II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
(II) Module savage: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.27
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) SAVAGE: driver (version 1.1.27t) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
ProSavage PN133, ProSavage KN133, SuperSavage/MX 128,
SuperSavage/MX 64, SuperSavage/MX 64C, SuperSavage/IX 128,
SuperSavage/IX 128, SuperSavage/IX 64, SuperSavage/IX 64,
SuperSavage/IXC 64, SuperSavage/IXC 64, ProSavage DDR,
ProSavage DDR-K
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ProSavage found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xec122000 - 0xec1227ff (0x800) MX[B]
[6] -1 0xec121000 - 0xec1210ff (0x100) MX[B]
[7] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[8] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[9] -1 0xec000000 - 0xec07ffff (0x80000) MX[B](B)
[10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
[13] -1 0x0000d800 - 0x0000d87f (0x80) IX[B]
[14] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[15] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xec122000 - 0xec1227ff (0x800) MX[B]
[6] -1 0xec121000 - 0xec1210ff (0x100) MX[B]
[7] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[8] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[9] -1 0xec000000 - 0xec07ffff (0x80000) MX[B](B)
[10] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[11] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[12] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
[16] -1 0x0000d800 - 0x0000d87f (0x80) IX[B]
[17] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[18] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[19] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[20] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(**) SAVAGE(0): Depth 16, (--) framebuffer bpp 16
(==) SAVAGE(0): RGB weight 565
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset
is 0x0000
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(--) SAVAGE(0): Chip: id 8d04, "ProSavage DDR-K"
(--) SAVAGE(0): Engine: "ProSavage"
(--) SAVAGE(0): mapping MMIO @ 0xec000000 with size 0x80000
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram: 32768k
(--) SAVAGE(0): Detected current MCLK value of 14.318 MHz
(II) SAVAGE(0): Monitor0: Using hsync range of 30.00-72.00 kHz
(II) SAVAGE(0): Monitor0: Using vrefresh range of 50.00-110.00 Hz
(II) SAVAGE(0): Clock range: 10.00 to 250.00 MHz
(II) SAVAGE(0): Not using mode "1400x1050" (hsync out of range)
(II) SAVAGE(0): Not using mode "1400x1050" (hsync out of range)
(II) SAVAGE(0): Not using mode "1400x1050" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x960" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of
range)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of
range)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of
range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of
range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of
range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of
range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of
range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (hsync out of
range)
(II) SAVAGE(0): Not using default mode "896x672" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "896x672" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1856x1392" (hsync out of
range)
(II) SAVAGE(0): Not using default mode "928x696" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "928x696" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1440" (hsync out of
range)
(II) SAVAGE(0): Not using default mode "960x720" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x720" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1152x864" (hsync out of range)
(II) SAVAGE(0): Not using default mode "576x432" (hsync out of range)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1200" (hsync out of
range)
(II) SAVAGE(0): Not using default mode "960x600" (hsync out of range)
(--) SAVAGE(0): Found 13 modes at this depth:
[10e] 320 x 200, 70Hz
[133] 320 x 240, 72Hz
[143] 400 x 300, 72Hz
[153] 512 x 384, 70Hz
[11d] 640 x 400, 70Hz
[111] 640 x 480, 60Hz, 75Hz, 85Hz, 100Hz, 160Hz
[114] 800 x 600, 60Hz, 75Hz, 85Hz
[117] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 100Hz, 130Hz
[17a] 1280 x 768, 60Hz
[14f] 1280 x 960, 60Hz, 85Hz
[11a] 1280 x 1024, 60Hz, 75Hz, 85Hz, 100Hz
[13c] 1400 x 1050, 60Hz, 75Hz
[122] 1600 x 1200, 60Hz
(--) SAVAGE(0): Virtual size is 800x600 (pitch 800)
(**) SAVAGE(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) SAVAGE(0): Modeline "800x600" 56.30 800 832 896 1048 600 601
604 631 +hsync +vsync
(**) SAVAGE(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) SAVAGE(0): Modeline "640x480" 36.00 640 696 752 832 480 481
484 509 -hsync -vsync
(==) SAVAGE(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xe0000000 - 0xe7ffffff (0x8000000) MS[B]
[1] 0 0xec000000 - 0xec07ffff (0x80000) MS[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xec122000 - 0xec1227ff (0x800) MX[B]
[8] -1 0xec121000 - 0xec1210ff (0x100) MX[B]
[9] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[10] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0xec000000 - 0xec07ffff (0x80000) MX[B](B)
[12] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
[18] -1 0x0000d800 - 0x0000d87f (0x80) IX[B]
[19] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[20] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[21] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[22] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(--) SAVAGE(0): mapping framebuffer @ 0xe0000000 with size 0x2000000
(==) SAVAGE(0): Write-combining range (0xe0000000,0x2000000)
(--) SAVAGE(0): Chose mode 114 at 85Hz.
(II) SAVAGE(0): Using 1447 lines for offscreen memory.
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
8 256x256 slots
(==) SAVAGE(0): Backing store disabled
(**) Option "dpms"
(**) SAVAGE(0): DPMS enabled
Symbol xf86InterpretEDID from module /usr/X11R6/lib/modules/libvbe.a
is unresolved!
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "PS/2"
(**) Mouse0: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(**) Option "Protocol" "IMPS/2"
(**) DevInputMice: Protocol: "IMPS/2"
(**) Option "AlwaysCore"
(**) DevInputMice: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) DevInputMice: ZAxisMapping: buttons 4 and 5
(**) DevInputMice: Buttons: 5
(II) XINPUT: Adding extended input device "DevInputMice" (type: MOUSE)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
Again, this system worked fine on Friday - but NADA this morning. I
am sure its a matter of proper driver and nomenclature referenced in
the XF86Config file.
I visited VIAtech and downloaded the latest driver, followed the
instructions and still no luck.
BTW - due to the extreme amount of spam I receive my email is
intentionally set incorrectly.
The system is a Shuttle XPC SK41 system.
[ Post a follow-up to this message ]
|
