Fcc: outbox
Host: panta-rhei.dyndns.org:2525 # Check port number
From: me@there.com
Chain: panta,*,apple2; copies=4
To: mail2news@freedom.gmsociety.com,
mail2news@dizum.com



The above (extract) heading worked for a time but not for long in QS.

No more  

Has Panta put a freeze on it maybe?

Any variations worth trying?

P Ringer

[ Post a follow-up to this message ]

"springer22@false.com" <upside33@wrong.com> wrote in message
news:Xns9605D9888D2D9hhdd6@81.174.12.30...
> Fcc: outbox
> Host: panta-rhei.dyndns.org:2525 # Check port number
> From: me@there.com
> Chain: panta,*,apple2; copies=4
> To: mail2news@freedom.gmsociety.com,
> mail2news@dizum.com
> The above (extract) heading worked for a time but not for long in QS.
>
> No more  
>
> Has Panta put a freeze on it maybe?
>
> Any variations worth trying?
>
> P Ringer
========================
I also use QS.  Nothing is moving again these past 24 hours.  I've tried
every possible combination.

John S

[ Post a follow-up to this message ]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi !
[vbcol=seagreen] 

No changes at Panta Rhei.
The remailer is ticking like clockwork.

Try:
telnet panta-rhei.dyndns.org 2525
in a command window. You should see the SMTP server. If you use TOR you
need to socksify telnet first.

If telnet fails to connect to panta you might have a problem with finding a
network route.
It works from here.

If telnet can connect to Panta Rhei but QS can not then there is a problem
in your QS config.
If QS sends the mail out, but it never gets posted, you might post to a
group not supported at the mail2news.
Check your newsgroups header, its very prone to typos. Maybe try panta,*,*
thus avoiding fixed exit node which might be down.
If all fails, try to send to an email address to see if there is a problem
with your chain, or send your post to alt.test via the panta m2news.

Cheers,
panta-admin

-----BEGIN PGP SIGNATURE-----
Version: N/A

iQA/ AwUBQhyUjtcrLUqmoDLIEQKzgQCfVESBIcNeDi7R
5MFTg9q63r5Ow6MAn3KM
JDX1Ewh/PLFsciAWi37rJii7
=tAHu
-----END PGP SIGNATURE-----
~~~~~~~~~~~~~~~~~~~~~
This message was posted via one or more anonymous remailing services.
The original sender is unknown.  Any address shown in the From header
is unverified. You need a valid hashcash token to post to groups other
than alt.test and alt.anonymous.messages. Visit www.panta-rhei.dyndns.org
for abuse and hashcash info.

[ Post a follow-up to this message ]

panta-admin <anonymous@panta-rhei.dyndns.org> wrote in
news:29MX0Q0U38406.6393865741@anonymous.poster:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hi !
> 
>
> No changes at Panta Rhei.
> The remailer is ticking like clockwork.
>
> Try:
> telnet panta-rhei.dyndns.org 2525
> in a command window. You should see the SMTP server. If you use TOR
> you need to socksify telnet first.
>
> If telnet fails to connect to panta you might have a problem with
> finding a network route.
> It works from here.
>
> If telnet can connect to Panta Rhei but QS can not then there is a
> problem in your QS config.
> If QS sends the mail out, but it never gets posted, you might post to
> a group not supported at the mail2news.
> Check your newsgroups header, its very prone to typos. Maybe try
> panta,*,* thus avoiding fixed exit node which might be down.
> If all fails, try to send to an email address to see if there is a
> problem with your chain, or send your post to alt.test via the panta
> m2news.
>
> Cheers,
> panta-admin
>

Very helpful Panta ...  Thanks 

[ Post a follow-up to this message ]

"springer@fakeit.com" <upside@down.com> wrote in message
news:Xns9606867557014hhdd6@130.133.1.4...[vbcol=seagreen]
> panta-admin <anonymous@panta-rhei.dyndns.org> wrote in
> news:29MX0Q0U38406.6393865741@anonymous.poster:
> 

This is what "telnet panta-rhei.dyndns.org 2525" gives in QS:

Mixmaster Chain 1 of 5
Connecting...
Winsock Error: 11004 No Data
Aborting...
[vbcol=seagreen] 

Where is *HERE?*
[vbcol=seagreen] 

When the message header that have worked for weeks suddenly stops working,
and no changes were ever made to these headers, then the problem is
somewhere else.
[vbcol=seagreen] 

They're not even getting to the test newsgroups.
[vbcol=seagreen] 

Checked and rechecked.  They're the SAME headers what worked great before.

Maybe try[vbcol=seagreen] 

Tried that this morning.  As of 3:36 PM (7 hours) they have yet to show up
on the test ngs.
[vbcol=seagreen] 

Doesn't that need a hashkash token?
[vbcol=seagreen] 

Thanks  JS

[ Post a follow-up to this message ]

-----BEGIN PGP SIGNED MESSAGE-----

On Wed, 23 Feb 2005 15:38:13 -0600, "John S." <anon@wise.net> wrote:

>"springer@fakeit.com" <upside@down.com> wrote in message
>news:Xns9606867557014hhdd6@130.133.1.4... 
>
>This is what "telnet panta-rhei.dyndns.org 2525" gives in QS:
>
>Mixmaster Chain 1 of 5
>Connecting...
>Winsock Error: 11004 No Data
>Aborting...

I think you should read what Panta-Admin said again. You use Telnet
from the command window NOT add "telnet" to your QuickSilver Host:
header.
Select Start|Run and type in the word "command". This will open a
Command Window.
Now (from the command line) type in "telnet panta-rhei.dyndns.org
2525 and hit Enter
You should get a message something along the lines of  "Connecting to
panta-rhei.dyndns.org". If you do, it means you are able to connect
and there isn't a problem Panta's end. Just type in "Quit" to end the
connection.

Cheers,
Thrasher

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.8 for non-commercial use <http://www.pgp.com>

iQEVAwUBQhyWume9vBuCUlx7AQHETQf/fNqhxp760FrYJFpEO3I+aEVq0G5C+lCJ
 U0LdDOacRHnfaxRK5R4GWXSVF+2szS53RfZot1Yn
nNWOlGuo5kiSZLE+BPW2oEU4
 qEjo3BQSWDsMFswEQxDGQ2i23UPqnUJMTbvIup3P
J7TyqvlYQmUwWC6dm70+Ug1d
SoIMQK2yCqnE8DDec4UhRoRekHrH3qu2ySv/fp535PS0vksIPvPo2S2sSGZqoSJU
YrH02H3CA3fqr/ B2L99rSdCGU8BAjXdsOktUAYizCrqDJ4j80X8MsJ
zDUf/T17Fm
FPLYAJf7IWZbVkskqW9nvnFuZjFsUz/4qUJ/nx3l+QcBSODATp0HHA==
=3sIA
-----END PGP SIGNATURE-----

[ Post a follow-up to this message ]

In article <421cfad1@x-privat.org>
"John S." <anon@wise.net> wrote:
<snip>
> 
>
> When the message header that have worked for weeks suddenly stops working,
> and no changes were ever made to these headers, then the problem is
> somewhere else.

No problem sending through panta from here.  And no, I won't tell you where
"here" is.

If nobody else is having the problem and we can't determine what might be
unique to you, you're on your own.

~~~~~~~~~~~~~~~~~~~~~
This message was posted via one or more anonymous remailing services.
The original sender is unknown.  Any address shown in the From header
is unverified. You need a valid hashcash token to post to groups other
than alt.test and alt.anonymous.messages. Visit www.panta-rhei.dyndns.org
for abuse and hashcash info.

[ Post a follow-up to this message ]

"Thrasher Admin" <thrasher_admin@reece.net.au> wrote in message
 news:lp0q11dkprp0vb3criqjdhtq4ukg95phj7@
workshop.lan...
> -----BEGIN PGP SIGNED MESSAGE-----
>
> On Wed, 23 Feb 2005 15:38:13 -0600, "John S." <anon@wise.net> wrote:
> 
>
> I think you should read what Panta-Admin said again. You use Telnet
> from the command window NOT add "telnet" to your QuickSilver Host:
> header.
> Select Start|Run and type in the word "command". This will open a
> Command Window.
> Now (from the command line) type in "telnet panta-rhei.dyndns.org
> 2525 and hit Enter
> You should get a message something along the lines of  "Connecting to
> panta-rhei.dyndns.org". If you do, it means you are able to connect
> and there isn't a problem Panta's end. Just type in "Quit" to end the
> connection.

Thanks. It looks like I am unable to connect.  I did as shown above and got
a "cannot open connection to the host. Connection failed."

JS

[ Post a follow-up to this message ]

"Nomen Nescio" <nobody@dizum.com> wrote in message
 news:8744a4a1fe5c4e28b3f1021cd45a2004@di
zum.com...
> In article <421cfad1@x-privat.org>
> "John S." <anon@wise.net> wrote:
> <snip> 
working,[vbcol=seagreen] 
>
> No problem sending through panta from here.  And no, I won't tell you
where
> "here" is.
>
> If nobody else is having the problem and we can't determine what might be
> unique to you, you're on your own.
-------------------
Sorry,  I didn't mean your actual location!   :^)
I just checked and I see a few are making it that were sent last night.   A
bit of latency there.

JohnS

[ Post a follow-up to this message ]

-----BEGIN PGP SIGNED MESSAGE-----

John S. wrote:
> "springer@fakeit.com" <upside@down.com> wrote in message
> news:Xns9606867557014hhdd6@130.133.1.4...
> 

<snip>
[vbcol=seagreen] 

There should be a space before mail2news@dizum.com here. Not sure why it
didn't show up in your post here, but it might explain the 'no data'
error message.
[vbcol=seagreen] 
>
>
> This is what "telnet panta-rhei.dyndns.org 2525" gives in QS:
>
> Mixmaster Chain 1 of 5
> Connecting...
> Winsock Error: 11004 No Data
> Aborting...

hth,
Thomas
- --
"All my life, I've always wondered, What it would be like to fire a
ballistic missile" - Wonderfully colored plastic war toys, The Dead
Milkmen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (MingW32)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iQB5AwUBQiH/ 0AEP2l8iXKAJAQGoEwMglteYir94WjjPoN+4IHhd
BeeLtB+jH1si
DYIruodThi2ltTp/ 9fwCyy+xvUTGs1Vh4bXoqHn8Ho7WbTjWEDeWoVvl
T3nSKKsq
il2SlzD6OSg30qfOOj/aDIXQibTy5bf3X56zbg==
=XICM
-----END PGP SIGNATURE-----

[ Post a follow-up to this message ]